Instruction manual for installation #
– Unbox the device and components.
– Locate the floor stand assembly guide and allen key wrapped with the floor stand.
–Unscrew the screw at the bottom of the floor stand.
Floor stand should be screwed along with the base plate with front side of base plate to front bottom of the floor stand , tighten the screws well with allen key.
-
Unscrew the screw at the bottom of the floor stand.
-
Floor stand should be screwed along with the base plate with front side of base plate to front bottom of the floor stand , tighten the screws well with allen key.
-
Unscrew the four(4) screws on the back side of the display and fix the clamp plate to it , the sticker indicating top should be towards the manufacturing sticker or antenna side of display , tighten the screws very well with allen key.
-
Find the adapter provided inside the box
– Unscrew the screw at the bottom of the floor stand.
– Screw the floor stand along with the base plate, ensuring that the front side of the base plate is facing the front bottom of the floor stand. Tighten the screws well with an allen key.
– Unscrew the four screws on the back side of the display.
– Fix the clamp plate to the display, making sure that the sticker indicating top is towards the manufacturing sticker or antenna side of the display.
– Tighten the screws very well with an allen key.
-
Connect the power cable to the adapter and make the adapter go inside the floor stand and take the power connecting (3 pin) end outside the stand with the small cut out in back bottom side of stand, leave the display connecting adapter pin on top side of stand for connecting to display.
-
Unscrew the screws on top both sides of the floor stand and align the display clamp and screw the display clamp plate with floor stand and screw well with allen key.
-
Connect the power cable to the display socket and power on the switch.
-
This is the final look of the whole unit after the display is mounted to the floor stand.
THANK YOU !